Inventory Unit Detail
2011 Hustler Turf Equipment Hustler Z™ Diesel - Shibaura 25HP, 60 in. Rear
$9,900.00
Key Features
New/Used Used
Usage450 Hours
Availability
In Stock
LocationAshland Tractor
Condition
Excellent
Product Features
Dealer Notes
Clean Diesel, 60" Rear Discharge
Description
For operators who want the convenience of a diesel-fueled mower, the Hustler Z™ Diesel has the high-torque power to get the job done. The Z Diesel's heavy-duty 25 hp engine is positioned over the drive tires, distributing weight where it's most productive. A compact frame and low center of gravity give this mower increased stability. Boasting a top speed of 12 mph and Hustler's proprietary SmoothTrak™ Steering, the Hustler Z Diesel works hard and works fast, making it a great addition to any commercial fleet.
Features
- Rear-discharge deck
- Clean, compact design. Much more compact than competitive units
- Engine mounted sideways for serviceability and compactness
- Patented belt drive system provides up to 3X longer belt life
- Over 18,000 fpm blade tip speed -- superior quality of cut
- Wide stance, low center of gravity
- Simplest maintenance in the industry -- no daily lube points
- Durable rubberized discharge chute
- Toughest frame, front forks, and deck in the industry
- 12-mph top speed -- get the job done fast
Engine
- Engine: Shibaura Diesel 25 hp
- Engine Type: Liquid-cooled, inline, 3-cylinder, naturally aspirated industrial diesel engine
- Injection System: Bosch in-line
- Starter: 12-volt
- Ignition: Compression
- Charging System: 12-volt, 40-amp alternator
- Fuel: #2 diesel
- Air Filter: Heavy-duty air cleaner to extend the service interval for excessive, dirty applications and improved performance
- Oil Filter: Remote-mounted, spin-on engine oil filter (oil pan and filter can be drained into a single drain container for easy maintenance and minimal clean up) 5.1 qt (4.8 l) oil capacity
- Air Filter: Heavy-duty air filter with safety filter for maximum protection
- Cooling: Liquid cooled. Direct-driven, mechanical cooling fan
- Governor: Mechanical governor
Traction Drive System
- Type: Dual hydrostatic. Tandem pump power two direct-drive wheel motors. Hydrostatic system operates on 20W50 motor oil.
- Pumps: Tandem variable displacement, axial-piston type. Each pump powers, one drive-wheel motor. Hydro-Gear PW 21cc pump
- Pump Drive: Pumps are driven directly from crankshaft with a micro-V-belt.
- Hydraulic Lines: Stainless-steel, high-pressure lines with Parker SealLok™ O-Ring Face-Seal fittings.
- Hydraulic Cooling: Large capacity cooler with 8 inch fan for extended hydraulic life
- Filter: 40 micron in tank
- Ground Speed Forward: Infinitely variable 0-12 mph (0-19.3 kph)
- Ground Speed Reverse: Infinitely variable 0-7 mph (0-11 kph)
- Steering: SmoothTrak™ twin-lever steering with patented automatic park brake system provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls
- Turning Radius: True zero turning radius. Turns within its own length. Counter-rotating, independent drive wheels
- Service Brakes: Hydrostatic dynamic braking
- Parking Brake: Internal friction brake in each PRM wheel motor
- Front Tires: 13 x 6.50 – 6, rib tread
- Drive Tires: 24 x 12 – 12, turf tread
- Fuel System Capacity: 14.4 US gal (54.5 l)
- Hydraulic Oil: 7 qts (6.6 l)
- Engine Coolant: 6 US qts (5.7 l)
General Information
- Safety Features: Standard foldable ROPS with seat belt. Operator presence system connected to seat, deck clutch and park brake switches. Stabilizer wheels at rear of lawn mower. Side discharge deck with discharge chute and rear discharge deck with deflectors.
- Seat: Suspension, molded-vinyl, adjustable seat with armrests. Fore and aft adjustment
- Construction: Main frame is 1.5 in x 3 in x .187 in (3.8 cm x 7.62 cm x .47 cm) rectangular steel tubing. Drive motors mounted to 7 ga (.45 cm) welded steel. Front caster wheels mounted with roller bearings on each wheel. Front caster forks are .5 in (1.27 cm) steel
- Deck Lift: Foot-operated deck height adjustment. Pin for setting height, detent for transport position
- Controls: Hand-operated throttle, ignition switch, electric mower clutch. Integrated parking brakes.
- Indicators: Hour meter, high temp light, oil pressure light, charge light, glow plug light, audible alarm for high engine temperature and low oil pressure, electronic fuel gauge for each tank.
- Cup Holder: Two cup holders molded into the left side fuel tank. Accommodates nearly any cup size.
Dimensions
- Height ROPS folded down: 51 in (130 cm)
- Height ROPS up: 69 in (175 cm)
- Length: 86 in (218 cm)
- Overall width: 61 in (155 cm) w/discharge chute up
- Tire-to-tire width: 56 in (142 cm)
- Weight: 1600 lbs (726 kg)
Decks
- Rear-Discharge: 60”
- Type: Free-floating deck using three blades with center blade to the front. Mower deck is suspended at the corners. Includes deck-mounted rollers to improve flotation in rolling and uneven terrain.
- Deck Lift: Raise and lower deck from driver’s seat with simple foot-operated deck height adjustment. Pin for setting height, transport position. Change cutting heights, climb curbs and trailer more easily.
- Construction: 7 ga welded steel. Solid 1 in x .375 in (2.55 cm x .95 cm) steel bars reinforce impact areas on trim edges. .187 in x .375 in (.47 cm x .95 cm) reinforced front edge. Reinforcements welded onto spindle mount areas.Steel deck housing is 5.5 in (14 cm) deep to provide room for high-capacity mowing.
- Cutting Heights: Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25 in increments from 1 in to 5.5 in (2.55 cm to 14 cm).
- Mowing Blade Type: Heavy-duty, heat-treated, high-lift steel Fusion™ blades. Fusion blades feature an exclusive electro-fusion technology that creates an ultra-hard layer at the blade’s cutting edge, the blade remains sharp and continues to give a clean cut far longer than any blade on the market.
- Mowing Blades: 20.50 in x 2.50 in x .203 in flat blade, high sail
- Blade Tip Speed (at 3600 RPM engine speed): 18,960 fpm
- Deck Drive : V-belt drive from engine with Warner electric CMS 250 enhanced spot brake clutch to all three spindles. Spring tension idler for extended belt life.
- Spindles : Machined ductile iron housing, 1.5 in (3.8 cm) dia. high carbon steel shafts and sealed ball bearings.
- Discharge Chute : Molded Rubber:Over-center design allows for chute to be folded up for improved trailering or to pass thru gates, etc.
- Width of Cut: 59.10 in (150 cm)
- Trim Capacity (left side): 2.9 in (7 cm)
Accessories
- Mulch Kit: Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil.
- Light Kit: Work all night if you want
- Hitch Kit: Optional bolt-on hitch with 7/8-inch hole. Will accept any standard ball.
- Hour Meter: Monitor maintenance intervals
- 3-Bag Catcher: Commercial duty, 12 bushel, rear-mounted, three bag catcher.
- Flex Forks™: Shock-absorbing front caster wheel forks for a smooth ride and a smoother cut.
- Steering Extension Kit
- Striping Kit
- Snow Blade
- Hydraulic Deck Lift Kit
Warranty
- 2 Year, No Hour Limit or 4 Year 500hrs
- Lifetime Warranty on Tractor Frame
- Lifetime Warranty on The Leading Edge of the Deck
- 3 Years on Blade-Spindle Bearings
- 3 Years on Front-Caster-Fork Bearings
Engine
| Engine Manufacturer | Shibaura |
| Horse Power | 25 hp |
| Engine Type | Liquid-cooled, inline, 3-cylinder, naturally aspirated industrial diesel engine |
General
| Transmission | Dual hydrostatic. Tandem pump power two direct-drive wheel motors. |
| Wheel Size | Front: 13 x 6.50 – 6, rib tread; Drive: 24 x 12 – 12, turf tread |
| Fuel Capacity | 14.4 gal. (54.5 L) |
Deck
| Deck Size | 60 in. |
| Discharge Type | Standard: Rear; Optional: Mulch, Rear Catcher |
